Monitoring

VeriComm® Septic System Monitoring

How Does It Work?

A telemetry-enabled VeriComm®Control Panel is installed on a site. The panel calls the VeriComm® Monitoring System, toll-free, to communicate operating data in the middle of the night . . . typically once a month. No dedicated phone line required. If there is an Alarm or Alert condition, the panel calls in immediately, 24/7. A message is sent to the designated operator’s e-mail-capable device (phone, pager, computer, tablet). Messages are re-sent, regularly, until the condition has been cleared. All operating data is stored in the Monitoring System’s database, where it is accessible via a password-protected Web site.

The VeriComm® Monitoring System...

Automatically notifies operators of alarms
Self-adjusts based on trend data
Allows operators to change settings remotely

Diagnoses...

High and low liquid levels
Stuck float switches
Pump failure
Pump lockout from brownout
Clogged filter
Leaking tank
Failed contactor
Chattering contactor
Excessive pump cycles/runtime (a symptom of excess water use)

Summary

Our company stakes its reputation on the performance of onsite wastewater collection and treatment systems. That’s why we use VeriComm® Telemetry Control Panels and VeriComm® Monitoring Systems. VeriComm® verifies and communicates system operation, remotely — 24 hours a day, 7 days a week

Peace of Mind... that’s what you get with VeriComm's® 24/7 System Monitoring.

Did you know? Alberta Private Sewage Installers and Designers must have a Private Sewage Installer Certificate number in order to submit a permit for development on your property.